Authenticating Users

Introduction

Authentication Mechanisms

GSSAPI is specific to Kerberos version 5. Additionally, STARTTLS client side certificates have not been extensively tested.

When STARTTLS is enabled, the PLAIN SASL mechanism (if installed) also becomes available. This is because one should not pass a clear text password over the wire unless the connection is encrypted.

The IMAP protocol also supports a way for users to authenticate without using SASL (the specification). This is via the 'LOGIN' command (not to be confused by the LOGIN SASL mechanism). The IMAP LOGIN command (as with PLAIN) will send your password in clear-text to the server. In this case, the password is still verified through the Cyrus SASL library, though no SASL mechanism actually performs a negotiation.

The POP server is capable of APOP authentication, but this requries that Cyrus SASL be compiled --with-checkapop, and also that you are using an auxprop backend for your password store (e.g. the sasldb auxprop plugin).

Authentication Recommendations

• If you are running a mail server on a single machine, we recommend that you configure the system to use CRAM-MD5 or DIGEST-MD5. We have not provided utilities for you to let users change their passwords but either we or someone else might provide that feature.
• If you have more than one mail server, we recommend that you configure the system to use GSSAPI and Kerberos5.
• If you have some other authentication mechanism that requires the clear text password, you should use saslauthd.

  saslauthd is something specific to the Cyrus SASL libraries. While it is less generic than PAM, it is much simpler to configure. The IMAP server simply sends a userid and a corresponding password down a Unix domain pipe. Then, saslauthd takes that userid and password and tries to authenticate with it -- using whatever authentication you use -- and simply returns "yes" or "no" as to whether or not the password was correct.

  It is possible to configure saslauthd to check these passwords via a PAM mechanism, /etc/passwd, or other possibilities.

  PAM stands for pluggable authentication modules and the purpose is to provide a common API which applications can use to obtain authentication for a user. You can think of PAM as a complementary layer under the SASL layer. See http://www.kernel.org/pub/linux/libs/pam/FAQ for more information on PAM. By using a PAM module, all the other applications on your system can take advantage of it -- for example, login, xlock, etc.

  Keep in mind that when you use PLAIN or LOGIN you should encrypt the stream so a user's password cannot be trivially sniffed off of the network.

Configuring Authentication

Cyrus SASL has a number of options that can be configured by the application. To configure these via imapd.conf, simply prefix the appropriate option name with sasl_ (e.g. pwcheck_method becomes sasl_pwcheck_method).

/etc/sasldb2

The easiest method for authenticating users is to use the libsasl authentication database and create users using the "saslpasswd2" utility. Set "sasl_pwcheck_method: auxprop", and be sure that the SASL sasldb auxprop module is installed (it is, by default). Make sure Cyrus can read "/etc/sasldb2":

   chown cyrus /etc/sasldb2*

Shadow Passwords

If you want to authenticate users from "/etc/shadow", things are considerably more complicated, since the cyrus user cannot read the shadow password file. Additionally, this will not allow you to use shared secret mechanisms. To do this, it is necessary to configure libsasl with saslauthd support, and set "sasl_pwcheck_method: saslauthd". The SASL library will then make calls to an external utility running as root to authenticate users.

Kerberos

Configuring Kerberos v4

Cyrus IMAP supports Kerberos v4 if the SASL library was compiled with KERBEROS_V4 support.

You'll have to create a Kerberos v4 identity for the server and add the server's key to the "srvtab" file. The file must be readable by the cyrus user. The server's Kerberos identity is "imap.HOST@REALM", where "HOST" is the first component of the machine's host name and "REALM" is the machine's Kerberos realm.

1. Here is a sample session, creating a srvtab file for the host named "foobar":

      ksrvutil -f /var/imap/srvtab add
   

   Here is the information "ksrvutil" requests. Respond by filling in values or by pressing RETURN. In this example, the host name is "foobar" and the realm is "ANDREW.CMU.EDU".

      Name: imap
      Instance: foobar
      Realm: ANDREW.CMU.EDU
      Version number: 
      New principal: imap.foobar@ANDREW.CMU.EDU; version 0
      Is this correct? (y,n) [y] 
      Password: 
      Verifying, please re-enter Password: 
      Key successfully added.
      Would you like to add another key? (y,n) [y] n
   

2. If you plan to install Kerberized POP, create the Kerberos identity "pop.HOST@REALM" and add the key to the "srvtab" file. Likewise, if you plan on using LMTP over TCP, create the Kerberos identity "lmtp.HOST@REALM" and add the key to the "srvtab" file.

3. Make the "srvtab" file owned by the cyrus user:

      chown cyrus /var/imap/srvtab
   

4. Add the option srvtab option to /etc/imapd.conf:

      srvtab: /var/imap/srvtab

5. Test using imtest -m KERBEROS_V4. imtest will attempt to authorize as the current Unix user regardless of the current ticket's held. Override this with the -u option.

Troubleshooting Kerberos_V4 problems

Run the program "krbck" (found in the imap directory) as the cyrus user on the IMAP server. This program will diagnose some common Kerberos v4 configuration errors.

Configuring Kerberos v5

Cyrus IMAP supports Kerberos v5 if the SASL library was compiled with GSSAPI support.

You'll have to create a Kerberos v5 identity for the server. Kerberos v5 keys are generally stored in "/etc/krb5.keytab".

1. Add the "imap/hostname" key using "kadmin".
2. Let the cyrus user read "/etc/krb5.keytab": user:

      chown cyrus /etc/krb5.keytab
   

3. Test using imtest -m GSSAPI. imtest will attempt to authorize as the current Unix user regardless of the current ticket's held. Override this with the -u option.